The pilot jet has a straight cut screwdriver slot and is located directly in front (engine side) of the main jet. The main jet and pilot jet are both in the float chamber. So will that cafe husky thing have the standard float heights and jets and stuff? And I'm in Victoria around Mt Evelyn. Yeah it has the mikuni carb, NGK br9eg plug, the engine seems to run ok, maybe lacking a bit in the power department haha but maybe I'm just getting used to it, but I'm planning and replacing piston and rings and what not soon enough. Haha it's always a pain to help out the kid with barely any idea of what's goin on. You'll soon feel what changes are right and which ones are not.īe aware, particularly with these bikes, that each engine will require slightly different setting. Take your time, make small changes and only change one thing at a time, test riding between after each one. ![]() Jetting is a skill you learn by trial and error. Which does yours have?įirst thing to do is remove the carb and find out what jets your running. ![]() ![]() The original carb was a Mikuni TMX, but a common swap was to fit a Keihin PWK or Lectron. How does the engine run? What spark plug are you using - brand and designation? There's a lot of information on the wr125 on site "cafe husky", particularly regarding carby tuning. ![]() Welcome to the world of husky ownership mate.Īlways remember you don't own a Husqvarna, you understand it.
0 Comments
Leave a Reply. |